🎛️Elgato Box
Elgato Stream Deck enclosure your ultimate race-ready control hub!
📄Product Description
Introducing our Elgato stream deck holder, the perfect solution to while you race! It is designed to be mounted directly onto aluminum extrusion, providing a stable and sturdy base. Not only is the Aluminum Extrusion Elgato box keep all your important buttons at your fingertips but also offert quick tool-less adjutments.
📖 User Guide
📦 Package content
1x Lockball system(including flat and angled ball)
1x Elgato box (Compatible with Mk2)
1x Mounting hardware
🪛 Elgato Disassembly
Start by removing unplugging the USB-C cable and taking Stream Deck MK.2 off of the stand.
Holding Stream Deck MK.2 in one hand, rest the palm of your hand on the keys.
Use the tips of your fingers to pry one corner off of the Stream Deck MK.2.
Repeat on the second corner
An audible snap may be heard.
Once both corners are loose, carefully pull the Faceplate off of Stream deck MK.2
You can also watch elgato's video about the disassembly
Congatulatiuon the disassembly is now finished
🔩 ElgatoBox Assembly
"Make sure to have followed the "Elgato Disassembly" before continuing, otherwise it will not work.
Unscrew the 4 screws on the back of the elgato box
Start by taking the font plate and the disassembled Elgato
The Elgato needs to be incerted by putting the USB Type-C side against the red circled part
Incert the disasembled Elgato in the front plate this way
The USB Type-C has to be oriented to the red circled part
Push the Elgato inside of the box
Install the cable by passing it through the hole and then connecting it to the Elgato
Put the backplate back in place and tighten the screws
Congatulatiuon the instalation is now finished
Last updated